About Us Products What's New RFQ Tech. Assistance Ordering Info. Cross Reference Reps. Distributors Contact Us Site Map

THIS LATEST ADDITION TO OUR POWER SUPPLY LINE HAS BEEN INTRODUCED AFTER MUCH DEMAND. ENDLESS APPLICATIONS WILL BE MORE COST EFFECTIVE WITH DC POWER ATTAINABLE DIRECTLY FROM YOUR HIGH LINE. PLEASE ADD A "-480" SUFFIX TO OUR STANDARD PARTS TO ACCOMODATE A "240/480" VAC INPUT.

BENEFICIAL FEATURES INCLUDE:

• 240/480 VAC INPUT ; 50/60 Hz
• OUTPUT IS REGULATED DC POWER
• UPTO 720 WATTS REGULATED OUTPUT
• ELIMINATES STEP - DOWN CONTROL TRANSFORMERS
• 5, 12, 15, 24, 28, & 48 VDC OUTPUTS AVAILABLE
• MTBF OVER 250,000 HOURS
• LOW RADIO INTERFERENCE
• OUTPUT RIPPLE AS LOW AS 2mV RMS
• STANDARD OVERLOAD PROTECTION
• STANDARD REVERSE POLARITY PROTECTION
• STANDARD SHORT CIRCUIT PROTECTION
• STANDARD REMOTE AND LOCAL SENSE (MOST MODELS)
• DESIGNED TO MEET UL 950 / CSA 1950 / AND CE DIRECTIVES
• VIBRATION AND SHOCK PER MIL-STD-810B
• TWO YEAR WARRANTY

VALUE ADDED OPTIONS INCLUDE:

• SCREW TERMINAL BLOCK
• OVERVOLTAGE PROTECTION (STANDARD ON 5 VOLT MODELS)
• MOUNTING SPACERS
• INPUT FUSE

SPECIFICATIONS

AC INPUT: 240/480 VAC +/- 10%; 47-63Hz. SEE CHASSIS ID LABEL FOR JUMPER AND LINE FUSING REQUIREMENTS

DC OUTPUT: SEE SELECTION GUIDE FOR VOLTAGE/CURRENT RATINGS. THE OUTPUT IS FLOATING; EITHER POSITIVE OR NEGATIVE TERMINAL CAN BE GROUNDED. OUTPUT ADJUSTMENT RANGE IS +/- 10%, EXCEPT VARIABLE 10-18V OUTPUTS.

LINE REGULATION: +/-0.05% FOR 10% LINE CHANGE

LOAD REGULATION: +/-0.05% FOR 50% LOAD CHANGE

THERMAL REGULATION: +/-0.02% PER   ºC MAXIMUM, +/-0.005% PER ºC TYPICAL

OUTPUT RIPPLE: 2mV RMS MAXIMUM, 3mV P-P

DYNAMIC RESPONSE: 30 MICROSECONDS FOR 50% LOAD CHANGE

STABILITY: +/-0.3% FOR 24 HOUR PERIOD AFTER 1 HOUR WARM-UP

SHORT CIRCUIT AND OVERLOAD PROTECTION: FOLDBACK CURRENT LIMITING, SET AT 120% OF NOMINAL

OVERVOLTAGE PROTECTION: CROWBAR OVERVOLTAGE PROTECTION IS STANDARD ON ALL 5 VDC MAIN OUTPUTS AND IS FACTORY SET AT 6.2V +/-0.4V (FIXED). OPTIONAL UNIVERSAL OVP MODULE ADJUSTABLE FROM 4.5 TO 36V IS AVAILABLE FOR OTHER MODELS.

REMOTE SENSING: STANDARD ON ALL OUTPUTS ABOVE 30 WATTS. REMOTE SENSE WILL COMPENSATE FOR A CABLE DROP OF 0.25V. PROTECTED AGAINST OPEN OR SHORTED SENSE LEADS. TWISTED PAIR SENSE LEADS ARE RECOMMENDED.

EFFICIENCY: 5V UNITS: 45%; 12 AND 15V UNITS: 55%; 24V AND HIGHER UNITS: 60%.

OPERATING TEMPERATURE: 0ºC TO 50ºC FULL RATED LOAD, DERATE LINEARLY TO 40% AT 70ºC.

STORAGE TEMPERATURE: -55ºC TO +85ºC.

VIBRATION: PER MIL-STD-810B, METHOD 514, PROCEDURE 1, CURVE AB (TO 50Hz)

SHOCK: PER MIL-STD-810B, METHOD 516, PROCEDURE V

SAFETY STANDARDS: DESIGNED TO MEET SAFETY REGULATIONS OF UL, CSA, VDE, CE, AND OTHER INTERNATIONAL STANDARDS.

FINISH: CLEAR ALUMINUM CHASSIS. CHASSIS ALSO SERVE AS HEAT SINK.

MOUNTING: UNITS CAN BE MOUNTED ON SEVERAL SURFACES. MOUNTING HOLES WILL ACCEPT "PRESS FIT" #6-32 THREADED FASTENERS. FOR EFFICIENT COOLING, ALLOW UNRESTRICTED AIR FLOW. FORCED AIR COOLING MAY BE RECOMMENDED.

INPUT : 208/240/480 VAC

Model Case Size Output 5 Volts BVA-5AS1.5-480 AS 5V @ 1.5A BVA-5AS3-480 AS 5V @ 3A BVA-5BS6-480 BS 5V @ 6A BVA-5CS9-OVP-480 CS 5V @ 9A BVA-5DS12-OVP-480 DS 5V @ 12A BVA-5ES18-OVP-480 ES 5V @ 18A BVA-5FS25-OVP-480 FS 5V @ 25A 7 Volts - - - BVA-7AS2-480 AS 7V @ 2A BVA-7BS4-480 BS 7V @ 4A BVA-7CS6-480 CS 7V @ 6A BVA-7DS8-480 DS 7V @ 8A BVA-7ES12.5-480 ES 7V @ 12.5A BVA-7FS17.5-480 FS 7V @ 17.5A 10 Volts BVA-10AS1.7-480 AS 10V @ 1.7A BVA-10BS3.4-480 BS 10V @ 3.4A BVA-10CS5.1-480 CS 10V @ 6.8A BVA-10DS6.8-480 DS 10V @ 6.8A BVA-10ES10.2-480 ES 10V @ 10.2A BVA-10FS16-480 FS 10V @ 16A 12 Volts BVA-12AS0.9-480 AS 10V @ 0.9A BVA-12AS1.7-480 AS 12V @ 1.7A BVA-12BS3.4-480 BS 12V @ 3.4A BVA-12CS5.1-480 CS 12V @ 5.1A BVA-12DS6.8-480 DS 12V @ 6.8A BVA-12ES10.2-480 ES 12V @ 10.2A BVA-12FS16-480 FS 12V @ 16A 15 Volts BVA-15AS0.9-480 AS 15V @ 0.9A BVA-15AS1.7-480 AS 15V @ 1.7A BVA-15BS3-480 BS 15V @ 3A BVA-15CS4.5-480 CS 15V @ 4.5A BVA-15DS6-480 DS 15V @ 6A BVA-15ES9-480 ES 15V @ 9A BVA-15FS15-480 FS 15V @ 15A                                      18 Volts                             Back BVA-18AS1.5-480 AS 18V @ 1.5A BVA-18BS3-480 BS 18V @ 3A BVA-18CS4.5-480 CS 18V @ 4.5A BVA-18DS6-480 DS 18V @ 6A BVA-18ES9-480 ES 18V @ 9A BVA-18FS15-480 FS 18V @ 15A                                      24 Volts                             Back BVA-24AS0.5-480 AS 24V @ 0.5A BVA-24AS1.2-480 AS 24V @ 1.2A BVA-24BS2.4-480 BS 24V @ 2.4A BVA-24CS3.6-480 CS 24V @ 3.6A BVA-24DS4.8-480 DS 24V @ 4.8A BVA-24ES7.2-480 ES 24V @ 7.2A BVA-24FS12-480 FS 24V @ 12A - - - BVA-24CLR15-480 Call Factory 24V @ 15A BVA-24CLR30-480 Call Factory 24V @ 30A                                      28 Volts                             Back BVA-28AS0.5-480 AS 28V @ 0.5A BVA-28AS1-480 AS 28V @ 1A BVA-28BS2-480 BS 28V @ 2A BVA-28CS3-480 CS 28V @ 3A BVA-28DS4-480 DS 28V @ 4A BVA-28ES6-480 ES 28V @ 6A BVA-28FS10-480 FS 28V @ 10A                                      48 Volts                             Back BVA-48AS0.5-480 AS 48V @ 0.5A BVA-48BS1-480 BS 48V @ 1A BVA-48DS3-480 DS 48V @ 3A BVA-48ES4-480 ES 48V @ 4A BVA-48FS8-480 FS 48V @ 8A

  © 2004 PowerVolt, Inc. All rights reserved.