Power Supplies

Ultraminiature BVS

PowerVolt Provides the Ultraminiature Size wide range 90VAC to 264VAC Input. 3.3VDC to 24VDC Output. Regulation is maintained with full rated load at 90VAC. Fully Protected against output overload and short circuit. Single and dual Output models- 5Watts and 10Watts. 3000VAC In-Out Insulation. UL/CSA approved and CE marked. Measured at full rated load and nominal AC input voltage. 75% ±5% Depending On How the Load Is Distributed among the Outputs.

Product Features

 

  •     Ultraminiature  Size
  •     Wide Range 90-264VAC Input
  •     3.3VDC to 24VDC Output
  •     Single/Dual Output Models
  •     3000VAC In-out Insulation
  •     UL, CSA and CE marked

Applications

AC Input:

Wide range input from 90-264VAC

DC Outputs:
See Voltage/Current Rating Charts

Output Power:
See Voltage/Current Rating Charts.

Brown-Out Voltage:

Regulation is maintained with full rated load at 90VAC .

Hold-Up Time:

20 msec typical at full rated load and nominal AC input
voltage. Hold-up time increases to 40 msec at 50% load.

Efficiency:
Measured at full rated load and nominal AC input voltage.
75% ±5% depending on how the load is distributed among
the outputs.

Regulation Characteristics:

See Voltage/Current Rating Charts for individual model ratings.
Measurement method:
Line: Measured over a 90-132VAC or 175-264VAC
line change.
Load: Measured over a 20% to 100% load change. Multiple output model regulation is subject to the minimum load requirements.

Initial Setting Tolerance
:
Measured at 50% of full rated load on all outputs.

Input Protection:
AC input line fuse provided. Internally located.

Output Noise and Ripple:
0.3% RMS, 1% PK-PK Typical.

Overload Protection:
Fully protected against output overload and short circuit. Automatic recovery upon removal of overload condition. Delayed-fold back current limiting characteristic assures reliable turn-on into reactive and non-linear loads.

Power-Up Initialization Period:
Typical 2.0 sec turn-on delay assures orderly ramp-up and stabilization of all output voltages during power-up.

Overvoltage Protection:
Clamp, 130-150%.

Temperature Rating:
Operating: 0°C to +50°C at full rated output power. Derate linearly to 50% of full load from 50°C to 70°C.
Storage: -55°C to +85°C.

Temperature Coefficient:

±0.03%/°C typical, ±0.05%/°C maximum over entire operating temperature range of 0°C to +70°C.

Shock:

Operating: 20G peak acceleration. 

Cooling:
Convection cooling is adequate for convection power ratings providing that non-restricted convection air movement is available. When operating in a confined area, forced air cooling is recommended.

Vibration:

Random vibration from 10Hz to 2KHz, 6.15 grms (3 axis).

Safety Agency Certifications: (pending)

  •     UL 1950 without D3 deviation, file #E181899
  •     CSA C22.2 No. 950, UL file #E181899
  •     CE Marked

Please select desired output voltage below:

SelectPart NoNominal VoltageConvection Cooled CurrentInitial Setting ToleranceLine RegulationLoad RegulationOutput Adjustment Range(min) ConfigurationData Sheet 
BVS-F05M20052± 5.0V± 0.50A5.0V ± .1V0.2%2%4.75V to 5.50VBOARD ONLY 2.25" x 2.95" x 0.54" (57.2mm)x(74.9mm)x (13.7mm-Nil-Check Price
BVS-F10M20052± 5.0V± 1.0A5.0V ± .1V0.2%2%4.75V to 5.50VBOARD ONLY 2.25" x 2.95" x 0.54" (57.2mm)x(74.9mm)x (13.7mm-Nil-Check Price
BVS-F05M20122± 12.0V± 0.21A12V ± .1V0.2%2%11V to 13VBOARD ONLY 2.25" x 2.95" x 0.54" (57.2mm)x(74.9mm)x (13.7mm)-Nil-Check Price
BVS-F10M20122± 12.0V± 0.42A12V ± .1V0.2%2%11V to 13VBOARD ONLY 2.25" x 2.95" x 0.54" (57.2mm)x(74.9mm)x (13.7mm)-Nil-Check Price
BVS-F05M20152± 15.0V± 0.17A15V ± .2V0.2%2%14V to 16VBOARD ONLY 2.25" x 2.95" x 0.54" (57.2mm)x(74.9mm)x (13.7mm)-Nil-Check Price
BVS-F10M20152± 15.0V± 0.34A15V ± .2V0.2%2%14V to 16VBOARD ONLY 2.25" x 2.95" x 0.54" (57.2mm)x(74.9mm)x (13.7mm)-Nil-Check Price
Mechanical Drawings

Mechanical Dimensions (in Inches)

No mechanical dimensions available
Schematics