PowerVolt Provides the Ultraminiature Size wide range 90VAC to 264VAC Input. 3.3VDC to 24VDC Output. Regulation is maintained with full rated load at 90VAC. Fully Protected against output overload and short circuit. Single and dual Output models- 5Watts and 10Watts. 3000VAC In-Out Insulation. UL/CSA approved and CE marked. Measured at full rated load and nominal AC input voltage. 75% ±5% Depending On How the Load Is Distributed among the Outputs.
- Ultraminiature Size
- Wide Range 90-264VAC Input
- 3.3VDC to 24VDC Output
- Single/Dual Output Models
- 3000VAC In-out Insulation
- UL, CSA and CE marked
Wide range input from 90-264VAC
See Voltage/Current Rating Charts
See Voltage/Current Rating Charts.
Regulation is maintained with full rated load at 90VAC .
20 msec typical at full rated load and nominal AC input
voltage. Hold-up time increases to 40 msec at 50% load.
Measured at full rated load and nominal AC input voltage.
75% ±5% depending on how the load is distributed among
See Voltage/Current Rating Charts for individual model ratings.
Line: Measured over a 90-132VAC or 175-264VAC
Load: Measured over a 20% to 100% load change. Multiple output model regulation is subject to the minimum load requirements.
Initial Setting Tolerance:
Measured at 50% of full rated load on all outputs.
AC input line fuse provided. Internally located.
Output Noise and Ripple:
0.3% RMS, 1% PK-PK Typical.
Fully protected against output overload and short circuit. Automatic recovery upon removal of overload condition. Delayed-fold back current limiting characteristic assures reliable turn-on into reactive and non-linear loads.
Power-Up Initialization Period:
Typical 2.0 sec turn-on delay assures orderly ramp-up and stabilization of all output voltages during power-up.
Operating: 0°C to +50°C at full rated output power. Derate linearly to 50% of full load from 50°C to 70°C.
Storage: -55°C to +85°C.
±0.03%/°C typical, ±0.05%/°C maximum over entire operating temperature range of 0°C to +70°C.
Operating: 20G peak acceleration.
Convection cooling is adequate for convection power ratings providing that non-restricted convection air movement is available. When operating in a confined area, forced air cooling is recommended.
Random vibration from 10Hz to 2KHz, 6.15 grms (3 axis).
Safety Agency Certifications: (pending)
- UL 1950 without D3 deviation, file #E181899
- CSA C22.2 No. 950, UL file #E181899
- CE Marked